Exhibitor Promotions & Demos

Exhibitor Promotions & Demos 2018-03-19T17:34:12+00:00

Looking for a great deal or the most exciting products in the industry? Check out the special promotions and innovative products on display only at ISA Sign Expo 2018.

Abitech

Booth #: 421
1. 20% off your First Order of any size! (must have badge scanned at booth to qualify)
2. FREE SHIPPING on all orders over $250

Alco Finishing Equipment – PLASTGrommet

Booth #: 627
1. There will be a promotion going on at ISA to equip print shops. When purchasing a Bull Rack to store 15 media rolls 64″ and one pneumatic grommet press for #3 clear plastic grommets, there will be a 15% discount.

Allanson Lighting Components

Booth #: 4423
1. Win With Allanson. $500 cash to lucky draw winner. Visit booth #4423 and enter draw. Ballots available at booth or email contest@allanson.com for ballot. Draw will take place Saturday, March 24 at 12:00 pm at our booth and one winner will be presented with the prize immediately following the draw. If winner is not present at the time of the draw, we will contact the winner to make arrangements for transfer of prize. Good luck!

AnaJet/RICOH

Booth #: 4613
1. Come by our booth and experience our amazing DTG printers.
At the AnaJet booth, you’ll see the printer in action printing out hundreds of shirts. Touch them, test them and see the AnaJet advantage in person!

Beyond Signs Inc DBA Beyond Led Technology

Booth #: 4613
1.ISA Show Special: Linear Light Bars for Sign Cabinets
Starting from $9.99
Available single & double sided from 2ft-10ft sizes
UL Listed
Applications: Sign Cabinet, Menu Board & Monument Signs

2. ISA Show Special: LED Pole Light for Parking Lot,
300 watts with 40,000 Lumens for $249
Available in 100watts-300watts
Choose any Bracket: Slip Fitter, Straight Arm, U Bracket or Yoke Mount
5 Year Warranty. UL & DLC Listed
Philips Chip & MeanWell HLG Driver
Applications: Streets, Parking Lots Outdoor Tennis Count

3. ISA Show Special: LED Corn Bulbs
100 watts with 13,000 Lumens for $69
Available in 16watts-100watts
5 Year Warranty. UL & DLC Listed
Applications: Thick Sign Cabinet, Post Light, Streets, Parking Lots & Wall Packs

4. ISA Show Special: Solar Billboard Led Flood Light
Starting from $239
Available in 15watts-60watts
Programmable power brightness and lighting time
Microwave sensor
Outdoor Off Grid Applications, Billboards, Monument signs

5. ISA Show Special: LED HD Modules
1.8 watts with 166 Lumens per module for .79Cents
Available in 6500k, Red, Blue & Green.
5 Year Warranty. UL Listed
Applications: Channel Letter & Sign Cabinet

Canon Solutions America

Booth #: 5017
1. 0% Financing offer on select Océ Arizona series printers
Canon Solutions America in partnership with Canon Financial Services is offering 0% financing for 36 through 63 months on new Océ Arizona 300, 1200, 2200 series printers when financed by CFS. This lease promotion will have an FMV or $1.00 end-of-term purchase option.
THIS IS A LIMITED TIME OFFER.
• Promotion is valid only for deals signed between March 1st and April 13th , 2018
• Install must be complete and/or the printer must be accepted by June 30th , 2018
• Eligible “NEW” Models ONLY: Arizona 300, 1200, 2200 Series Printers

CASper on the Cloud

Booth #: 4631
1. CASper's ISA 2018 show special will feature a $2000.00 credit applied to each purchase on the show floor. Every ISA member company that becomes a new CASper customer will receive a credit of $2000.00 when CASper is purchased at the show.

2. CASper's ISA show special for all existing CASper clients: A credit of $25.00 per user per month will be applied to all new CASper users purchased at the show. This discount will apply for 12 consecutive months. There is no limit to the number of users that may be added.

3. CASper Art Proofing and Cloud Storage:
CASper offers a new automatic art proofing capability along with an additional 100 GB of cloud storage. ISA members will be offered a credit of 25% per 100 GB per month for 12 consecutive months for purchases made at the show.

Digital Graphic Inc.

Booth #: 1631
1. On-site purchase with $200 off on VT-9800H

2. On-site purchase with $200 off on AK-600

3. On-site purchase with $200 off on VT-9600H

4. Show Demo unit special discount

5. Siser Heat Transfer film discount

Duraluxe

Booth #: 437
1. We offer the possibility to become distributor of Duraluxe Panels in specific territories.

E. L. Hatton Sales Banner Ups

Booth #: 3935
1. Banner Ups Starter Kit Special 20% OFF
Are you ready to start making banners faster, stronger, and easier? The Banner Ups Starter Kit will help you do just that. Kit contains 100 Banner Ups Clear BravoTabs (our most versatile tab), 1 roll of Banner Ups Clear PowerTape (1.5€³ x 36 yd roll), and 1 ea Banner Ups PowerPunch (heavy duty hole punch sized right to tabs). Enough for about 20 banners, The Starter Kit will let you give Banner Ups a good trial and find out why so many banner makers LOVE Banner Ups!

EFI

Booth #: 5000
1. Special discounted Connect 2019 rate for ISA Sign Expo Attendees

The 2019 EFI Connect Users' Conference will features networking opportunities and educational sessions, access to EFI experts, customer panels and success stories, ‘how to' sessions, new technology, product advances, and so much more.

To take advantage of the special $100 Discount* register at https://www.regmadeeasy.com/efi/connect2019/ and use Promo Code:

With Hotel: CDT-100-ISA10
No Hotel: CDTN-100-ISA10

*Valid March 22-April 12, 2018

Esko

Booth #: 4200
1. Save 20% off your table bits and blades. Stop by Esko booth #4200 to get your discount code and more details.

Fisher Textiles

Booth #: 1407, 5403
Fisher Textiles is offering a 5% off first roll order discount for all first time orders placed through our new online customer portal using code ISA2018. (Up to $30 value). Visit www.fishertextiles.com and click Shop.

Geneva Capital LLC

Booth #: 4824
1. NO MONEY DOWN -and- NO PAYMENTS FOR 90 DAYS! With fast credit approvals, often in 30 minutes, you can purchase the equipment needed to grow your business right at the show! Offer subject to credit approval.

Gerber Technology

Booth #: 3120
1. OMEGA upgrade promotional pricing.

Graphtec America

Booth #: 3045
1. March Madness Print & Cut Bundle!

Receive $500 cash when purchasing any brand of large format printer bundled with a Graphtec FC8600-130 or 160 model.

This offer lasts from February 12 – March 31, 2018.

For more information, please visit:
https://www.graphtecamerica.com/cp-fc8600-special-offers

Haining Tiancheng warp knitting fabric CO.,LTD

Booth #: 2439
1. We are the material supplier of OLYMPIC GAMES:

2008 Olympic Games in Beijing
2012 Olympic Games in London
2014 The winter Olympics in Sochi
2018 The winter Olympics in Pyeongchang

Hanson Sign Companies

Booth #: 642
1. We will be offering 10% discount for any dimensional order placed during and order after the show. Please stop at the booth for specific discount offerings and to receive your coupon flyer.

2. Electrical Special – 10% off your order of anything electrical. Cabinets, Channel Letters, or Illuminated Monuments all qualify for this special! Make sure you stop at the booth to receive the specific show flyer and details!

3. Door Prize Drawing! Stop by booth 642 to enter your company in a drawing to receive $200 off your order of a Neon Alternative Lit Sign! Simply drop your business card or contact information off with us and you will be entered into the drawing. Drawing will take place at the conclusion of the ISA Show. Winner will be notified via phone and or email.

Howard Industries

Booth #: 706
1. Howard Industries will be giving away (2) ADA AdVantage Interior Signage Sales Kits! To become eligible, simply visit booth #706 and have your attendee badge scanned by a Howard Industries sales associate. Two winners will be randomly selected and the ADA AdVantage Interior Signage Sales Kits will be shipped directly to them following the show.

HP

Booth #: 108, 111, 3328, 2828
1. Free coffee, tea, water and lemonade during show hours.

2. Happy Hour: Thursday, March 22, 4:00pm – 5:00 pm in the booth.

3. Ride the gnarly surf on one of the largest inflatable waves around all day, every day and get your selfie

I Do Advertising Ltd

Booth #: 6012
1. FlipLight portable counters and totems:
!!! For more than 30 pcs ordered during ISA Sign Expo, 2018, you can have FlipLight promo counter or totem for the special price of 120 EUR per pc., which is 50% off from the official price.

!!! Distribution contract – additional discount of 5 % just during the ISA show, for those who choose to become our partners.

2. Custom made signs, POS and POP displays
Only for orders made at our booth during ISA Sign Expo, 2018, you can have one of the following special offers:
!!! 10% special discount from the production price of a custom made product

OR

!!! One free of charge design for a custom made product.

ikeGPS

Booth #: 2030
1. We will be offering a show special discount of $50 off your purchase of Spike.

INCISEON

Booth #: 1137
1. Free Sample Kit: Scan your badge to be entered into a drawing for a free sample kit. Includes INCISEON Skeletonized sample letter, and plug and play power supply.

kk label zhongshan Inc

Booth #: 5021
1. Cutting vinyl.

Lamina System AB

Booth #: 4242
1. We will offer our exhibition machine for a special exhibitions price, visit us in our Booth for more info.

Lektron LED Technologies

Booth #: 1627
1. Happy Hour every day of the show. Stop by for a free drink and to meet the team to talk about our products.

2. During Happy Hour we will have a “wheel of fortune”. Chances to win free Lektron gear as well as up to 15% off a future order of product.

3. We will be giving away a RTIC 45L cooler that is jam packed with beach goodies such as sunscreen, insulated tumblers, beach towels, etc! Stop by and get your badge scanned for a chance to win!

4. Stop by our booth to chat with the team on how to get a free estimation for replacing neon on an upcoming project.

LKS TECHNOLOGY

Booth #: 423
1. We will offer the special sales price during the show.

Master Magnetics, Inc.

Booth #: 4908
1. Vehicle Wrap Magnets – Box of 6
Buy one box of 6 for $36, get one free

MultiCam, Inc.

Booth #: 1800
1. APEX 1R CNC Router starting at $49,995.
Show System – serial # 1-204-RA1-12674 on sale for $79,995. (tax, shipping, installation & training not included)

2. APEX 3R CNC Router starting at $69,995.
Show System – serial # 3-204-R16-12527 on sale for $84,995. (tax, shipping, installation & training not included)

3. MAGNUS CO2 LASER 170 Watt starting at $117,740.
Show System (upgraded to 450 Watt) – serial # M-103-LH-12382 on sale for $159,995. (tax, shipping, installation & training not included)

Murdoch Engineering

Booth #: 1130
1. NEW CUSTOMERS – 50% off first project (Up to $200 discount)

2. Stop by our space and enter for a chance to win a: DEELAT Ultrasonic Thickness Gauge and Meter

Mynice Optoelectronics co.,ltd

Booth #: 5242
1. Ellipse lens module, special for mini channel letter.

Nova Polymers

Booth #: 4505
1. Complete Package for $45,000 plus two free days of on-site training ($2,500 value); Silk Screen Print Kit ($300 value); and two Cases of Material ($800 value).

Novus Imaging, an M&R Company

Booth #: 1006
1. Show Special: Ultra 3200 Roll-to-Roll printer
4 color 150,000
4 color with white 170,000

2. Show Special: Synergia Hybrid
8 color 325,000
9 color 349,000

3. Show Special: Ultra II Flatbed
4 color 240,000
4 color with white 265,000

Onyx Graphics, Inc.

Booth #: 5213
1. Promotions around the newest version software release and new ONYX Hub release with costing can be learned directly by visiting the Onyx Graphics booth #5213. Ask us too about how to get shortlisted for first production through ONYX Advantage.

Orbus Exhibit & Display Group

Booth #: 1220
1. Win a showroom sample package (valued $868) OR free trip to an Orbus Boot Camp training! (Valued $750).

Paintzen

Booth #: 1949
1. 10% discount on all projects booked within 3 months of ISA Expo.
Mention this deal before accepting a quote and we will apply the discount. Maximum of $10,000 discount per project.

2. Come by and meet Brad and Peter at the booth and grab some paint brush pens sure to make the family happy.

Piedmont Plastics®

Booth #: 4007
1. Stop by Booth #4007 to see our new products and see how Piedmont Plastics can help you with your current or future projects!

Ricoh USA

Booth #: 600
1. Come visit us to talk with a solutions expert about how Ricoh can help you achieve your goals with solutions for wide format printing, finishing, workflow integration and color management, all supported by Ricoh's world class service team.

Rose Graphix LLC

Booth #: 5800
1. Buy One Printer, Get One Free Laser Engraving/Cutter

2. Customers who visited our booth will have chance to Get a Free iPad!

sign source usa

Booth #: 919
1. 10% discount on 1st set of letters order by 30 days after show.

Signlights LED

Booth #: 2449
1. Signlightsled is offering a 10% discount on all orders over $500 booked during ISA Sign Expo 2018. Case Sales Only. Shipping Fees Not Included in Discount. Restrictions Apply. See our representatives at booth #2449.

Top Value Fabrics

Booth #: 4438
1. HP will be printing TVF's Latex Performance Textiles live in their booth during the show. Stop by and see market-leading latex performance with Latex Performance Textiles on the HP Latex 3000, HP Latex 1500 and HP Latex 570 printers.

2. Mimaki will be printing TVF's Supernova and Canopy Polyester live in their booth. The brilliant prints will then be cut and sewn including SEG application by Matic on their automated SEG sewing equipment in the Mimaki booth. Mimaki will also be printing several of TVF's Performance and Fashion Apparel fabrics live in their booth, and these fabrics will be heat transferred as well as cut and sewn into finished products.

3. Miller Weldmaster will utilize TVF's Supernova to feature their automated SEG sewing equipment. They will also utilize printed DigiStretch in their booth for live SEG sewing demonstrations.

4. swissQprint will feature TVF's Midnight Blockout as well as Supra Fabric Elite on their new roll-to-roll capable 3.2 meter wide Nyla 2 UV printer. swissQprint will utilize TVF's print media finished by Zund with their new polyester laser cutting module for backlit and SEG frame graphics in their booth at ISA as well as for live printing demonstrations.

5.

Royal Sovereign will feature TVF's pre-printed Display Fabric and Deko-Tex 7047GFS for live demonstrations of their heat press equipment at the Royal Sovereign booth.

DGI will print TVF's DigiHeavy live in their booth at the Expo utilizing their newly launched FT-3204X Hybrid FABRIJET 3.2 meter wide printer capable of printing dye-sublimation heat transfer paper as well as direct disperse.

JK Group will print TVF's Supernova live in their booth during the show. Additionally, Parallax has printed TVF's Deko-Tex 7048GFS on their 3.2m MS Impres dye-sublimation printer purchased from JK Group. This fabric will be used for live demonstrations of laser cutting in the MCT booth on their grand format VersaTech 2.

VAOPTO, LLC.

Booth #: 5438
1. We offer the Best Price Guarantee – LED Panel Light Series, which replaces traditional lights, is an energy efficient, lead-free, UV-free, and long-lasting cold lighting source. In comparison to traditional lights, VaOpto's LED Panel Light Series reduces energy consumption by 50%-75%.

2. We offer the Best Price Guarantee – LED Indirect Troffer Series, which replaces traditional lights, is an energy efficient, lead-free, UV-free, and long-lasting cold lighting source. In comparison to traditional lights, VaOpto's LED Panel Light Series reduces energy consumption by 50%-75%.

3. We offer our competitive price – LED Indirect Troffer Series, which replaces traditional lights, is an energy efficient, lead-free, UV-free, and long-lasting cold lighting source. In comparison to traditional lights, VaOpto's LED Panel Light Series reduces energy consumption by 50%-75%.

Abitech

Booth #: 421
1. NC LED Rayden Series LED modules Powered by Samsung
Led modules manufactured in Korea with constant current drivers and high grade Samsung 5630smd chips
5 year Parts and 5 year Labor Warranty

2. Plasco Trim Caps
German made high quality trim cap with 165ft per roll and high resistance to fading from the sun.
3/4″ trim J style is very soft and great for smaller letters reducing labor time and headaches.
Free Professional Led Wizard Layouts.

Alco Finishing Equipment – PLASTGrommet

Booth #: 627
1. Bull Rack – Storage rack for 15 media rolls 64″ on wheels. It has an optional cutting accessory to easily slit the vinyl rolls.

2. Pneumatic grommet equipment for clear plastic grommets, the perfect tool for every sign shop to finish their banners in a professional way.

3. Corner Rounder. The tool to get perfectly rounded corners on Dibon material (ACP).

Allanson Lighting Components

Booth #: 4423
1. New Low Profile LED Module:
Allanson's new low prole LED module, designed with optimal batwing lens for 1.5 – 4″ shallow signs, provides brighter and even illumination that can allow you to install 2 modules per foot, reducing your installation time and cost!

2. New Next Generation LED Saber:
Allanson's new LED Saber, designed for further light projection, provides greater surface area coverage with maximized viewing and uniform light distribution for optimal results.

3. New Mini LED Module:
Allanson's new LEDgen2 mini LED module, designed to fit 1/2€ narrow stroke and 1.5€ shallow signs, provides flexibility and versatility while making a big impact.

AnaJet/RICOH

Booth #: 4613
1. Our Flagship RICOH Ri 6000 and Ri3000
Boasting blazing-fast print speeds, industrial reliability and showroom quality prints. Imagine printing vibrant custom graphics directly on apparel with a setup process that takes minutes, not hours. Change how your business fulfills orders with the speed to print a 12×10 inch graphic in as little as 27 seconds. Join us at ISA Orlando to see it in action.

Beyond Signs Inc DBA Beyond Led Technology

Booth #: 4613
1. ISA Show Special: LED Pole Light for Parking Lot
300 watts with 40,000 Lumens for $249
Available in 100watts-300watts
Choose any Bracket: Slip Fitter, Straight Arm, U Bracket or Yoke Mount.
5 Year Warranty. UL & DLC Listed.
Philips Chip & MeanWell HLG Driver.
Applications: Streets, Parking Lots Outdoor Tennis Count.

2. ISA Show Special: LED Corn Bulbs.
100 watts with 13,000 Lumens for $69.
Available in 16watts-100watts
5 Year Warranty. UL & DLC Listed
Applications: Thick Sign Cabinet, Post Light, Streets, Parking Lots & Wall Packs

3. ISA Show Special: Linear Light Bars for Sign Cabinets
Starting from $9.99
Available single & double sided from 2ft-10ft sizes
UL Listed
Applications: Sign Cabinet, Menu Board & Monument Signs

Canon Solutions America

Booth #: 5017
1. Océ Arizona 1280 GT – UV Flatbed Printer
Member of the best-selling UV flatbed printer family in the world. The Océ Arizona 1200 series UV Flatbed Printer Series includes 3 different large format models – each available in 2 different table sizes. The GT table size enables standard production of single 4'x8′ boards while the XT supports an 8'x10′ print area that can also be configured to support dual 4'x8′ board printing.

2. Colex Sharpcut Digital Cutting System
Canon Solutions America, Inc. offers the Sharpcut Digital Flatbed Cutter and Finishing System as an entry level flatbed cutter for those print service provider’s looking to grow their business. This complete turnkey cutting solution helps automate workflow and reduce costs associated with the finishing process of wide format output. The Sharpcut digital flatbed cutting system can help open doors to new application opportunities and tap into new revenue streams.

3. Océ Colorado 1640 printer
The Océ Colorado 1640 wide format printer, powered by UVgel technology, fills the gap between current technologies in the roll-to-roll production market. Print service providers now have a clear choice when it comes to a graphics printing system that will help deliver real production efficiency while lowering their operating costs, enabling them to profitably grow their business.

CASper on the Cloud

Booth #: 4631
1. For Project Managers:
The CASper Cloud makes it easy to manage documents, files, projects and production and maintain client relationships, from the office or the field. With CASper Cloud, project managers can establish milestones, contact customers, vendors, coworkers and access files and historical data all within a simple cloud-based platform via smartphones, tablets, and computers. The CASper Cloud community is based on communication, organization and document storage all effectively managed and shared within the organization. See projects at a glance with all relevant documents and files, hours worked to date, and time line for completion.

2. For Sales personnel and Sales Managers:
The CASper Cloud with CRM is designed to maximize the effectiveness of the sales team. To increase communication with clients and prospects as well as with estimators, designers and project managers. Powerful opportunity tracking keeps the focus on each opportunity and tracks each step of the sales process from lead to close and hand off to production. Sales analysis and budgeting will keep sales goals in clear focus.

Powerful, effective and simple to use CRM will keep you in front of customers and prospects. Marketing and sales is communication and CASper Cloud communicates.

3. For business owners new document management and cloud data storage tools along with a new data analytic dashboard:
The CASper Cloud is the hive that handles all the information brought into your business. The CASper Cloud offers a completely new and powerful business report writer with a business data analysis dash board. Using our new document management and cloud data storage tools the CASper Cloud keeps all the information organized and available.

The sales team brings back leads, design requests, bid forms to complete. Project managers and purchasing agents track vendors, inventory and outsourced labor and products. Installation, survey and service crews need access to accurate information and work orders. Time and material must be gathered for each job. Art Proofs must be automatically tracked and managed. The CASper Cloud holds all this required information and links it to each job with our document management and cloud storage tools. CASper's analytic programs presents this information in full view on the owners' dashboard clearly and concisely.

Digital Graphic Inc.

Booth #: 1631
1. Professional 65″ ROLL TO ROLL LAMINATOR, MODEL: VT-9800H. $3500

2. Professional 65″ ROLL TO ROLL LAMINATOR, MODEL: VT-9600H. $3200

3. Professional 65″ Mounting LAMINATOR, MODEL; AK-600. $1800

Duraluxe

Booth #: 437
1. Duraluxe Textured Panels

2. Duraluxe Matte Panels

3. Duraluxe Saltlake Panels

E. L. Hatton Sales Banner Ups

Booth #: 3935
1. FINISH STRONG WITH NEW CRYSTAL CLEAR BRAVOTABS®!
Banner Ups® BravoTabs are a great new addition to your toolkit for three reasons. First they just as strong as Large Clear PowerTabs, however they are square in shape, so they work great both at corners and along banner edges – a “”one size fits all”” solution. Unlike, PowerTabs, there is no neck loop, which some customers would cut off if not used. With BravoTabs, there is no need to clip an unused neck loop. Finally, because they are a simpler shape, BravoTabs are easier to make – and that translates to a lower cost. BravoTabs are crystal clear banner tabs, allowing your color graphics to shine through. They are easy to use, versatile, and cost-effective!

2. New Clear PowerTape
A great product just got better! Clear PowerTape has a clear base film instead of the white film of Original PowerTape, resulting in some great new benefits. Banner Ups® Clear PowerTape is a single-sided banner hem tape. Unlike ordinary double-sided banner hem tape, there is no need to fold a hem in the media to reinforce banner edges. Just apply Banner Up Tabs on the corners, then simply strip PowerTape along the top and bottom edge of the back of the banner, then punch holes through the tape, tabs, and media with a Banner Ups PowerPunch. Make banners in 1/5th the time of traditional methods (3 minutes vs 15 minutes)! And the banners you make will be double the strength. Watch the videos below to see how!

3. MAKE SILICONE EDGE GRAPHICS (SEG) SIGNS WITHOUT SEWING!
KederTape is a high-quality keder that is laminated with a premium pressure sensitive adhesive which allows the product to be “peel and stick” applied to textiles for SEG (Silicone Edge Graphic) applications. No sewing needed. KederTape adhesive has been engineered to aggressively adhere to textiles.

EFI

Booth #: 5000
1. EFI MarketDirect Cross Media
The newest solution in customer communication and marketing campaigns, that's designed to make engaging with your customers both existing and new, easy and hassle free. It achieves this by providing an intuitive yet powerful user experience where you can quickly create rich personalized communications across nearly any medium including; email, web, print, mobile and social media.

2. The EFI™ Pro 16h wide-format hybrid roll/flatbed printer sets a new standard for entry-level LED production. This affordable 65-inch wide printer includes two channels of white ink, has faster speeds than other EFI entry-level hybrid production platforms (up to 30% in some modes), and is driven with the Fiery® proServer Core with FAST RIP technology, assuring the lowest total cost of ownership, superior image quality and access to a wide range of substrates/applications.

3. Customers have higher expectations on color and quality for a growing range of applications, needing color to be accurate and consist. EFI™ Fiery® digital front end and color management workflow for wide- to superwide-format production and proofing ensures stunning, precise, and predictable color; support for the latest industry standards; streamlined, automated and customizable workflows; smooth and consistent print quality; and powerful production tools.

Link: http://www.efi.com/products/inkjet-printing-and-proofing/fiery-for-inkjet/fiery-proserver-for-vutek/overview/

Esko

Booth #: 4200
1. NEW! Automation Engine QuickStart for Sign is a turnkey solution designed specifically for sign and large format printers. With pre-loaded proven workflows, and just 5 days to get you up and running, you start reaping the benefits of automation almost immediately.

2. Kongsberg X24 – The Kongsberg X series offers limitless versatility at an unmatched value. Whether you focus on signage, packaging or displays, the Kongsberg X series makes sure you never have to say no to a finishing job, now, and in the future.

3. Kongsberg C64 – The Kongsberg C series stands for performance, 24/7. The wide format Kongsberg C is designed to keep up with the faster, wider digital printers of today and tomorrow.

Fisher Textiles

Booth #: 1407, 5403
Fisher Textiles, the leading supplier of fabric for digital printing will showcase our two newest fabrics, GF4019 Nirvana B.O.B.® and GF6090 SunBright®. Nirvana is a Dye Sub and UV printable black-backed knit for frontlit soft signage SEG and roll-up banner stands. The black back provides a built-in liner for finished applications and promotes cost savings in material and labor. SunBright is a Dye Sub printable knit for backlit SEG with excellent vibrancy of color and stretch properties.

Geneva Capital LLC

Booth #: 4824
Geneva Capital is a direct lender offering competitive and creative, tailor-made lease purchase plans, including start-ups and tax leases. Credit decisions can be made right on the show-floor in as little as 30 minutes! Apply Today!

Gerber Technology

Booth #: 3120
1. GERBER EDGE FX Production System, Design-Print-Cut (Software, thermal printer, vinyl/material cutter), as well as full line of materials and foils and aftermarket.

NEW GerberColor Foils: Deep Sea Blue, Seafoam, Fern Green.

2. Gerber Sabre router and aftermarket (full line of bits, etc.)

3. OMEGA 6.5 Design and Output Software

Graphtec America

Booth #: 3045
1. Graphtec forms major partnership to unveil new large format cutting solution at ISA. Visit Booth # 3045 for more information!

2. Expand your business with the new 20€ Graphtec CE LITE-50. High quality print & cut results for HTV apparel, decals, and more. Intuitive operation with 4.3€ touch panel & included software.

3. Flagship Graphtec FC8600 roll fed cutting plotters will be demonstrating their superior print & cut ability with both adhesive vinyl and rigid high intensity prismatic substrates.

Haining Tiancheng warp knitting fabric CO.,LTD

Booth #: 2439
1. Flag material: 105GSM/110GSM popular item with good mirror effect

All are suitable for DYE SUBLIMATION,Latex and UV printer

2. Front-lit/display material: 220GSM/250GSM are popular for display, POP UP, table cover and Tent.

All are suitable for DYE SUBLIMATION, Latex and UV printer

3. Light-box material: 320GSM/260GSM/270GSM/185GSM are popular for backlit.

All are suitable for DYE SUBLIMATION,Latex and UV printer

Hanson Sign Companies

Booth #: 642
1. We will be exhibiting our three lines of Channel Letters. We will be offering Front Lit, Halo Lit and our new Trim-Less option. All channel letters are constructed from aluminum coil, illuminated with Principal LEDS and power supplies, Front lit are constructed with a 3/16 acrylic face where as the halo utilizes a aluminum face. Our Trim-Less lines is made from a ribbed aluminum coil which allows a .25″ acrylic face to set inside of the coil for a flush appearance.

2. Dimensional Signage will be on hand to view the options and differences of each material that we have to offer. We will be displaying our Redwood, Cedar, HDU and Extira Signage.

3. Neon Alternative LED lighting. This is a new up and coming product that Hanson Sign has partnered with G2G Neon to offer our customers. The Neon Alternative allows customers a new innovative product that is market friendly, has the same appearance as Neon without the hassle of true Neon, and less Maintenance. Neon Alternative is LED lighting encased in a eco-friendly Flexible PVC tubing with UV stabilizers. It has a vivid uniform Neon-like lighting with out the worry of dark spots or gaps in the tubing.

Howard Industries

Booth #: 706
1. Interior and Exterior Architectural Signage.

HP

Booth #: 108, 111, 3328, 2828
1. Customized Clothing and Wall Decal demos – ongoing during all show hours in the Juice Bar.

2. HP PageWide XL 8000 wrapping paper demo – ongoing during all show hours.

I Do Advertising Ltd

Booth #: 6012
1. FlipLight is the only illuminated, easy-to-use, lightweight portable counter with changeable image. It is perfect for any event, exhibition, promotion, showroom or retail environment. The product was developed further and now you can have also oval totem, double tradeshow desk (reception desk), promo tube and a showcase. FlipLight is an unique range of counters with quick set up – for less than 30 seconds with only 2-3 quick moves. Thanks to the special technology it weighs just 5-6 kg and folds in 2 parts. After your event ends, you can store FlipLight in its special handy bag.

2. Unique Illuminated and non-illuminated signs and totems made out of a combination of different materials such as plastic, metal, wood etc.

3. Custom made POS and POP displays and stands produced by beautiful and modern combination of different materials.

ikeGPS

Booth #: 2030
1. Spike

INCISEON

Booth #: 1137
1. INCISEON Skeletonized is a revolutionary 12v replacement for neon. Custom manufactured to almost any shape, INCISEON is available in over 26 colors, and can easily be installed by anyone.

kk label zhongshan Inc

Booth #: 5021
1. Adhesive vinyl, cutting vinyl, fluorescent vinyl, solvent sticker film, holographic film, etc.

2. Car wrap film. We use the import glue and liner.

Lamina System AB

Booth #: 4242
1. The Lamina Tape Machine is a straight line taping machine for one or multiple tape heads constructed on a sturdy frame of extruded aluminum profiles. The machine is designed for both automatic or manual feeding of diecut, creased and slotted materials. The length and the exact position of the tape lines are easy to set with the simple to use touch screen. A system of press rollers ensures perfect adhesion and guides the taped blanks to a stacking unit which is easily adjusted for different sizes. The Lamina Tape Machine is delivered ready-made for connection to the electrical and pneumatical systems. Can also be upgraded with hot and/or cold glue system at any time.

2. The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials.

The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc.

3. The Lamina Glueline is a compact fully automatic non-stop gluing and folding machine for one or two piece products such as BOXES, P.O.S, FSDU, DISPLAYS, PALLET WRAPS and DUMP BINS.

The machine works with two heavy duty vacuum controlled belt feeders which feed in the one or two parts and by using Lamina's registration system the machine is extremely effective.

Lektron LED Technologies

Booth #: 1627
1. LASER/LEON – Our brightest product incorporates a PVC housing component that is both UV and impact resistant along with a CLEAR or DIFFUSED polycarbonate lens. Your business will appeal to customers miles before they even reach you.

2. LumiFlex – Lektron's Flexible Simulated Neon. Our LumiFlex is horizontally bendable and easy to work with in the field. Forming arches and following architectural design features of a structure are a breeze for the LumiFlex. This is a perfect solution for interior or exterior lighting.

3. LumiStrap – Lektron's flexible LumiStrap is vertically bendable and easy to work with in the field. The LumiStrap can be utilized indoors or outdoors and provides vibrant colors. The LumiStrap is an attention grabbing and eye popping compliment to any structure.

LKS TECHNOLOGY

Booth #: 423
1. DS-PRO100
This machine is a automatic resin dispenser machine for resin channel letters.
Everybody who can has DS-PRO100 easy make high quality of resin channel letters.

2. LV-1000
This is automatic V-cut machine for trim cap.
LV-1000 is stable and accuracy dimension.

Master Magnetics, Inc.

Booth #: 4908
1. Vehicle Wrap Magnets

MB Enterprises of Cairo LLC

Booth #: 1850
1. Pop Star Sign frame with road side messaging or with promotional banner.

MultiCam, Inc.

Booth #: 1800
1. APEX 1R CNC Router – Designed for entry-level to small businesses, the all-new APEX1R CNC Router offers the same superior accuracy, cutting, and motion you can expect from a MultiCam system. MultiCam's APEX1R CNC Router is the most affordable servo driven router with spindle and knife capabilities to date.

2. APEX 3R CNC Router – This machine sets the standard for routing capabilities and offers a perfect balance between performance and precision. Combined with MultiCam's EZ control interface, the APEX3R is set to be the most well-rounded and lucrative CNC router for both novice and experienced operators.

3. Magnus CO2 Laser – A Precise and Cost Effective Laser Cutting System. Equipped with an impressive list of standard features and a host of available options, the Magnus CO2 Laser can cut or engrave for nearly any application.

Murdoch Engineering

Booth #: 1130
1. Licensed Nationally, Murdoch Engineering exclusively specializes in sign and awning structures. With our years of experience in sign structure engineering, we have learned the best methods and materials to use when working on a range of projects for a wide variety of clients with different needs. It can be difficult to receive attention and availability from an engineering firm, but at Murdoch Engineering, we understand the importance of maintaining a relationship with our clients and helping them to get the job done, from ensuring the safety and soundness of the structure to completing the necessary documentation and obtaining the correct permits.

Services including, but not limited to:
Pylon Signs
Channel Letters and Sign Cabinets
Billboards
Awnings and Canopies
High Rise Building Signs
Blade Signs
Structural Home Inspections
Solar Panel Inspection & Roof Certification

Mynice Optoelectronics co.,ltd

Booth #: 5242
1. LED module.

2. LED strips.

3. LED rigid bar.

Nova Polymers

Booth #: 4505
1. Complete package includes: Orbital X; Epson Printer with Rip Program; Workflow Manager Software Program; Accucutter; and Kobo Hot Stamp.

Novus Imaging, an M&R Company

Booth #: 1006
1. ULTRA flatbed LED printer.

2. Ultra 3200 Roll-to-Roll printer.

3. Textura 1800 printer, 1.8m Transfer Dye Sublimation.

Oki Data Americas

Booth #: 1611
1. Join us for live print demos & vehicle wrap installs featuring Troy Downey of Ape Wraps

10am – Set-up skills: Cut & Cut Contour
1:30pm – Critical Areas on Qualifying Your Project
3:30pm – 10 Things to Know Before You Wrap

Onyx Graphics, Inc.

Booth #: 5213
1. ONYX Software: Next Major Release
The latest release builds upon industry leading ONYX software version 12.2, a five-time award winner for business solutions, color management, RIP and print workflow solutions in 2017. It offers users a new color experience with next-level power and reliability, making print production easy.

2. ONYX Hub Costing
Onyx Graphics understands the pain of not knowing where money is being spent in a print environment. ONYX Hub software, a business intelligence tool that provides easy-to-understand data across a print service provider's entire site, now features job costing with ink, media, printer and labor rates all rolled into one intuitive dashboard. With new ONYX Hub costing providing actual data on job costs, business owners and production managers now have the tools to help answer questions such as “Did we estimate that job correctly?”, “How much did we make on that job?”, to ultimately answer “Are we profitable?”.

3. ONYX SiteSolutions
Onyx Graphics recognizes that modern print shops need solutions that will increase their production and revenue, lower their costs, and increase shop efficiency in order to compete. ONYX SiteSolutions is a portfolio of products that take a unique approach to giving business owners information about their print jobs, costs and productivity across their entire site. ONYX SiteSolutions address the areas of print production, connected workflows, and leveraging data to make better business decisions.

Orbus Exhibit & Display Group

Booth #: 1220
1. Adding to the popular line of exclusive Embrace displays are backlit displays that feature easy to install LED lights. Featured in four different sizes from tabletop to 12™ wide, the new Backlit Embrace displays are ideal options for attracting attention.

2. All Modulate fabric banners and exhibit kits now feature the option of magnetic frames! Magnetic frames allow for easy connection and reconfiguration. Banner and walls can be combined to create storage closets, conference areas, and used as divider walls in exhibit and retail settings.

3. Orbus introduces the Hopup Lite, an economy option of the popular Hopup Collapsible Display. Hopup Lite features an economy collapsible frame and is offered in two new sizes, 7.5™ and 10™ W.

Paintzen

Booth #: 1949
1. Wall prep after old signage has been removed.

Many times after old signage has been removed impression from are left in the stucco, EIFIS, or other softer exterior walls. Come learn about the Paintzen process to make these unsightly impressions go away.

2. Filling bolt holes from old signage

Many installers will use caulking to fill the holes after bolts from signage have been removed. Paintzen goes the extra mile to fill, level, and re-texture when needed to make your customers happy.

Come learn about our process.

Piedmont Plastics®

Booth #: 4007
1. Piedmont Sign Grade® SteelPOLY, A proven structural composite material that consists of two external steel skins thermally bonded to a low-density polyethylene (LDPE) core. Combined, these materials form a structure that is extremely strong and energy absorbent – providing durability, impact resistance and aesthetics for the most demanding applications. PSG SteelPOLY is a magnetic receptive sheet with a non-ghosting dry erase finish on one side, and an optimized print surface on the other.

2. TruLife® Anti-Reflective Single-Sided Acrylic is a unique and specialized acrylic product that was developed specifically for face/second surface mounting or direct printing on the substrate. Using TruLife® provides a contemporary look for fine art and photography, ensuring it's brilliant colors and a true to life appearance that other acrylic products simply can't match. It is manufactured with a Tru Vue® proprietary anti-reflective coating that creates a nearly invisible surface, eliminating distracting reflections and annoying glare associated with other acrylics. And unlike other acrylics that attract dust and scratch easily, TruLife® is anti-static and abrasion resistant. A truly brilliant idea!

3. MIRACLE-MAG™ is a new magnet material that combines 2 different technologies, micro-suction cling technology and our magnet sheeting technology, to create more than 220 lbs/SQ. FT of super holding force! The silicon micro-suction layer on the back helps to prevent magnet particle migration while adding additional resistance to sheer forces. This new material addresses the 2 most common problems with car sign magnets. It stays on the car and the silicon back liner helps to protect the paint from magnet particle migration. This material was designed especially for magnet car signs! Same price as standard car sign magnet materials!

Principal LED, LLC

Booth #: 3304
1. Build your layout online, right now! The eZLayout Builder is ready to go with our top products and will show you module counts, optimal spacing, number of power supplies needed, and more. Test out various designs live, then email or download a PDF of your final layout. No wait, and no cost! Visit us at Booth #3304 to see how easy it is to use.

Ricoh USA

Booth #: 600
1. Ricoh will be presenting wide format inkjet printing solutions including Ricoh and EFI Pro Series Inkjet Printers, along with an exciting interactive wide format experience, highlighting a variety of applications that demonstrate the power of wide format printing. Come take a look at Ricoh – there's never been more to see.

Roland DGA Corporation

Booth #: 4017
1. Roland DGA will be conducting live, in-booth vehicle wrap demonstrations daily at ISA 2018. The experts from Louisville, Kentucky-based Digital EFX Wraps will be working their vehicle wrap magic using Roland's state-of-the-art TrueVIS™ VG series and SOLJET® Pro 4 XR-640 printer/cutters. The vehicle wrap demos will take place on Thursday, March 22 and Friday March 23 at 11 am, 1 pm and 3 pm, and on Saturday, March 24 at 11 am and 1 pm.

2. Stop by the Roland DGA booth to see the company's state-of-the-art Texart™ series dye-sublimation printers in action. Roland's product managers will be demonstrating the impressive capabilities of these innovative inkjets, printing a variety of sublimation transfer graphics and providing attendees with a general overview of the dye-sublimation process.

3. Product customization and personalization are growing rapidly in popularity, and Roland's VersaUV® LEF and LEJ series printers are the ideal printing tools for these applications. Visit the Roland DGA booth and see unique UV flatbeds like the benchtop LEF-200 and larger LEJ-640FT print stunning graphics and dimensional effects directly onto substrates and three-dimensional objects. Roland's LEF series printers can print on materials and items up to 3.94 inches thick, while the LEJ-640FT can customize virtually any object up to six inches thick and weighing up to 220 pounds.

Rose Graphix LLC

Booth #: 5800
1. UV Flatbed Printer.

2. Fiber laser cutting machine.

3. CO2 laser engraving/cutting machines.

sign source usa

Booth #: 919
1. Trimless letters.

2. Quality led letters at a economical price.

Signlights LED

Booth #: 2449
1. SignlightsLED's Retrofit Signlighting System and Tubes/Generation2.

Space Services Limited

Booth #: 2447
1. SEG pop up system, patented design with innovative features.

2. SEG pop up light box, patented design with innovative features.

3. SEG pop up counter, patented design with innovative features.

Top Value Fabrics

Booth #: 4438
1. Top Value Fabrics' booth will feature stunning backlit graphics, printed by Planet Tradeshow on TVF's Supernova and Microlux Soft fabrics. The backlit arch, hanging sign and anchor structure all utilize LED lights within a system by Matrix Frame.

VAOPTO, LLC.

Booth #: 5438
1. VaOpto LED Panel Light Series.

2. VaOpto LED Indirect Troffer Series.

3. VAOPTO LED Shoebox Light Series.

A Gift For Teaching

Booth #: 853
ISA has partnered with A Gift for Teaching to collect used products at the end of the show. Exhibitors at ISA Sign Expo 2018 are asked to drop off any products at the show and ISA will ship all donations to A Gift for Teaching.

Visit www.AGiftForTeaching.org to learn more about this amazing organization.

Sign Research Foundation

Booth #: 1653
Visit Booth 1653 to join SRF in creating a public art string installation that shows how we are all connected. Be a part of something bigger than yourself by joining SRF in this incredible visual art experience.

Vantage LED

Booth #: 212
With your life, make an impact. We're donating our booth & efforts at ISA Sign Expo to raise awareness & donations for charities who work passionately to make the lives in our communities better & stronger. Every dollar raised will be matched by Vantage LED.

Join us at our booth 212 for food, drinks, and relaxation.